The Contessa 32 Internal Specifications

Contessa 32 Electrical [top]

• 2 x 12 volt 85+ amp hour batteries with single multifunction isolating switch.
• Glassfibre battery box.
• Customised distributor panel complete with line drawing of vessel and lights. Functions are protected by individual circuit breakers and indicator LEDs. (Steaming and deck lights cannot be used together). 2 battery testers with LED displays.

Contessa 32 Internal lighting

• 2 berth lights in forward cabin
• 1 overhead light and 2 berth lights in saloon;
• 1 flexible chart light at chart table with red night bulb + standard white light;
• 1 strip light over chart table;
• 1 strip light over galley;
• 1 overhead toilet light.

Contessa 32 Water Systems [top]

• 18gallon fresh water tank (grp) in tank under cabin sole unit + inspection cover.
• Deck filler.

Contessa 32 Heads compartment

• sea toilet with bronze Blakes seacocks.
• folding wash basin with double-acting Whale foot pump.

Contessa 32 Galley water system

• rotating faucet to double stainless steel sink;
• fresh water foot pump with waste pump (both double acting).
• Manual diaphragm bilge pump located in cockpit, drawing from a strum box in the deep sump.

Contessa 32 Interior [top]

• Interior woodwork of solid teak and teak faced plywood varnished.
• Cabin sole of laid solid teak and holly varnished.

Contessa 32 Galley [top]

• Stainless steel double sink with rotating faucet.
• Fresh water foot pump with waste pump (both double acting).
• Gimballed gas cooker with fiddle rail and locking bolt, 2 burners, grill and oven with flame failure device on all burners.
• Copper gas supply pipe from externally vented and drained gas locker, internal shut-off valve with flexible armoured hose to cooker - all to comply with EU directives.
• Complete galley top work surface in marble-effect composite with fiddles and radiused corners.
• Hinged draining board (marble-effect as above) covering food locker.
• Insulated food box and hinged lid (marble-effect as above).
• Pan stowage behind cooker.
• Behind cooker recessed food and plate racks with sliding tinted perspex doors;
• Above and outboard, hinged marble-effect composite locker doors opening to form horizontal shelf with fiddle; food storage behind.
• Crockery and cutlery racks.
• Rubbish bin locker under sink.

Contessa 32 Navigation Area [top]

• Chart table with radiused corner to take half size Admiralty chart; double hinged lid and chart stowage inside + 3 partitions for pencils, dividers, etc;
• 2 drawers and locker below;
• Bookshelf above and outboard;
• Open locker under chart table;
• Quarter berth end forms navigator's seat;
• Batteries stowed under berth.

Contessa 32 Main Saloon [top]

• U-shaped settee to port with table, which converts into double berth by using cockpit table stowed under quarter berth;
• Traditional solid teak drop-leaf table with bottle stowage in rigid centre section;
• Single berth to starboard with leecloth;
• Port and starboard sides: stowage behind backrests with lockers (raised panel solid teak doors) and bookshelf above.

Contessa 32 Toilet Compartment [top]

• One piece glass fibre moulding for easy cleaning;
• Fitted marine toilet, wash basin, mirror and stowage;
• Door to main saloon and PVC screen to forward cabin;
• Large hanging locker to starboard.

Contessa 32 Forward Cabin [top]

• 2 berths in V arrangement with stowage under option to convert to double berth with infill cushion;
• Large overhead locker forward (optional).
• Shelf on either side of cabin

Contessa 32 Aft [top]

• Quarter berth to starboard with locker under.

Contessa 32 Cockpit [top]

• Teak laid with large stowage locker to port;
• Enclosed gas locker vented overboard
• Stowage locker aft with bilge pump;
• 2 winch handle lockers;
• Lewmar mainsheet traveller aft of bridge deck.
• Contest bulkhead compass fitted

The foregoing specification must be confirmed at point of sale, as there may be changes and options chosen.

Terms of business [top]

• 10% deposit required with order, at which point the purchase price and delivery date will be confirmed.
• 30% stage payment will be due upon starting of moulding.
• 30% upon completion of moulding.
• The balance and the cost of extra items to be paid prior to the yacht leaving the factory.

Click here for Contessa 32 Exterior Specifications