Contessa 32 Spares & Accessories
Below is our full list of Contessa 32 spares & accessories. Because some of our spares need to be manufactured on demand, please allow up to four weeks for delivery.
Anode - example for Darglow 3-bladed prop
Contessa 32 cockpit table
cockpit table and cabin stowage
Depth log housing for transducer - bronze
Engine control panel moulding to fit in cockpit coamings
Fairleads (thru bulwark) per set - (2 pairs needed per boat)
Fairleads aft (handed) pair with s/s plates
Fuel or water deck filler (standard specification)
Fuel or water deck filler (best quality) by Bailey Marine
Guardwires - complete top and bottom (stainless steel PVC coated)
Harken Globe 1000 w/shackle - White/Green, FSE2275 Main Halyard, £256.01
Harken Globe 1000 w/shackle - White/Navy blue, FSE2274 Genoa Halyard 1, £256.01
Harken Globe 1000 w/shackle - White/Red, FSE2273 Genoa Halyard 2, £256.01
Harken Sirius 500 w/shackle - Red, FSE2260 Spinnaker Halyard, £125.76
Harken Sirius 500 w/shackle - Silver, FSE2385 Main Topping Lift, £104.40
Harken: Blue Performance - A company offering high quality solutions for the issues of boat storage, protection and comfort.
With regards to the Blue Performance range, Harken is offering a 15% discount to all Contessa Owners. Visit www.blue-performance.co.uk and enter the discount code CONDIS at the checkout.
Hatch, main perspex (with or without lock fitted)
Instrument console moulding for coachroof
Light - masthead light / anchor light or LED
Light fittings 12v light (2 per boat) or LED
Light fittings 12v round teak interior lamp or LED
Mast halyard exit slot for pre-1975 boats
Pipecot cushions depending on choice of fabric
Pipecots (aluminium folding) for fore cabin
Portlight for cockpit (see from qtr berth to cockpit)
Pushpit (for all pulpit and pushpit orders confirmation of exact sizes and foot positions is required - several different types were made)
Rudder, new (not including skeg heel plate or bearings)
Stanchion cranked (alongside primary winches)
Stanchions (all CO 32 vintages identical)
Stern tube cutless bearing (tufnol)
Please specify 25mm or 1 inch
Table - saloon teak faced ply, inc fittings
Table - saloon teak or Kebony, not varnished, including fittings
Table - saloon teak or Kebony, varnished, including fittings
Tiller straps (hood) with bronze block and alternative stainless steel block with square hole
U-bolts upper shroud (set of two including bars)
Washboard stowage
Stowage for washboards under companionway
Washboards, teak or Kebony, unvarnished (top with louvers)
Window - interior plastic linings and windows available separately
Windows - machine screw and interscrew set
Contact us for prices and further details
We accept all major debit and credit cards. For prices and further details, please contact us via e-mail at mail@jeremyrogers.co.uk, telephone +44 (0)1590 645454 or by post:
Jeremy Rogers Limited, Lymington Yacht Haven, Kings Saltern Road
Lymington, Hampshire, SO41 3QD, United Kingdom